Parts & Accessories

SHIMANO's WU101 wireless unit connects inline to a DI2 E-TUBE system enabling the use and connectivity of ANT+ and Bluetooth LE compatible accessories. It also allows the use of SHIMANO's smartphone and tablet E-TUBE PROJECT software for maintenance and system updates.

All you need for cycling data, all together at once! The Wahoo RPM Speed and Cadence sensors are both a sleek, wireless, and magnet-less solution. Each mounts easily to your bike and the Bluetooth Smart and ANT+ duel band technology allows you to connect and display data on both smartphone and bike computers. - Dimensions (LxWxH): 1.25" x.75" x 1" - Weight: 7 grams (without mount) - Battery: CR2032 - Battery Life: Up to 12 months - Water Rating: IPX7 (waterproof up to 5 ft) - Wireless Signal Strength: Up to 10 feet - Note: Speed Sensor is NOT compatible with spin bikes

SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes just 45 minutes to complete. - Finish: Black - Compatibility: SRAM RED eTap

The NavBag from BiKASE is your touring bike's best friend. Not only is the NavBag a spacious handlebar bag, but it also doubles as a map, tablet, or phone holder. No matter what form of navigation you prefer, the NavBag has you covered. • Reversible clear flap for smart phone and tablets • Reflective strips at front and sides • Magnets mechanism for easy operation • Shoulder strap included • PE stiffener structure • Mounts higher on handlebar than normal handlebar bags for less interference with cables • 840 denier nylon/TPU cover • 14 x 3.75 x 6.75 inches • 9 x 5.7 inches • 300 cubic inches

Whenever and wherever your adventure takes you, it's sure to be one you embark on with your smartphone. The Cruzen Universal Bike Mount is the most complete mounting solution for attaching a smartphone to your bike on the market. Whether you're bombing mountains on your downhill bike, CRUZEN the boardwalk on your beach cruiser or running with your jogger/stroller, the X-Grip handlebar mounting kit is guaranteed not to disappoint. But don't take my word for it. - Bar Mount - Stainless Steel Hardware - Cruzen Logo Friction Pad - 2 Spare Replacement Tips - Circular Rubber Spacer - Rubber Shim for thinner bars - Tether: For use on rough terrain.

A secondary or replacement mount for Specialized SpeedZone Expert and Comp computers. Includes a stem mount, bar mount, magnet and wireless ANT+ speed/cadence sensor.

The Wahoo TRACKR SPEED sensor is the sleek, magnet-less solution for capturing cycling speed data. It easily mounts to your bike's front wheel hub, and the Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and bike computers. Tracking speed data has never been this easy.

The Wahoo RPM cadence sensor is your sleek little solution for measuring cycling cadence data. It is wireless, magnet-less, lightweight, and easily mounts to your bike's crank arm or to your shoe. Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Collecting cadence data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - It only weighs 7 grams! - Provides accurate cadence data during your ride - (1) mount with double sided 3M tape, or (2) use the silicone sleeve and mount with zip ties. - The RPM can be worn on your shoe for spin classes or use with multiple bikes - Two LED lights show the sensor's device connection (blue) and cadence detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM cadence sensor will fit with most bikes and frame sizes

The Wahoo RPM speed sensor is the sleek, magnet-less solution for capturing cycling speed data. It easily mounts to your bike's front wheel hub, and the Bluetooth Smart and ANT+ dual band technology allow you to connect to and display data on both smartphones and bike computers. Tracking speed data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - The RPM speed installs easily with no magnets required - It only weighs 16.5 grams with the mount included - Provides accurate speed data during your ride - Mounts on most front wheel hub with a secure silicone casing - Two LED lights show the sensor's device connection (blue) and speed detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM Speed will fit with most bikes and frame sizes

Shimano Di2 Frame Junction Box Frame Junction Box connects via SD50 E-tube wires to four different points: front derailleur, rear derailleur, cockpit junction box and battery mount All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions Use Di2 system checker to update component firmware from http://e-tubeproject.shimano.com/

An excellent choice for mountain, cross, and road cyclists who prefer to have the computer above the stem. The mount replaces a standard 5mm spacer, and is locked securely in place by the top cap compression system. - Supported Computers – Wahoo ELEMNT, Wahoo Bolt, Wahoo MINI - Compatible – 1-1/8? Steerer tube Diameter, - Thickness: 5mm, Length 50mm (Center-to-Center) - Recommended for 0 Degree to Negative Degree Stem Angles - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Weight: 25g - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded

- Superlight computer/light mount fits cleanly underneath the stem - Replace a headset spacer(s) below or above the stem on any 1-1/8" steerer - 12mm stack height with 50mm wide mounting area, 120mm long angle adjustable arm

Our aerobar/TT mount for Wahoo ELEMNT GPS bike computers is made of lightweight, durable plastic and is the ideal viewing position during your triathlon or time trial. - Fits 22.2mm aero bar extensions - Weight: 0.3oz - Works with ELEMNT, ELEMNT BOLT, and ELEMNT MINI (Note: BOLT loses aerodynamic advantage with this mount)

Our stem mount for Wahoo ELEMNT GPS bike computers is made of lightweight, durable plastic and is a great solution for cyclists who prefer to keep their computer on top of the stem. - Fits any stem - Weight: 0.2oz - Works with ELEMNT, ELEMNT ROAM, ELEMNT BOLT, and ELEMNT Mini Note: BOLT loses aerodynamic advantage with this mount)

Mount your Garmin Edge computer with the Quarter Turn Bike Mount. It includes the bike mount, rubber disc, and elastic bands to secure the Quarter Turn to your stem or handlebars.

Wideslot Universal Computer Magnet

Cadence Magnet for all CatEye computers that record cadence.

- Dual-band Bluetooth and ANT+, magnetless sensor with integrated accelerometer - Quick pairing with CatEye Cycling app (Bluetooth) - Waterproof IPX7 (based on JIS C0920) - Works with Padrone Digital, Padrone Smart+, Padrone Smart*, and Strada Smart* *For Padrone Smart and Strada Smart, works in Mirror Mode only

An excellent choice for mountain, cross, and road cyclists who prefer to have the computer above the stem. The mount replaces a standard 5mm spacer and is locked securely in place by the top cap compression system. - Supported Computers – Wahoo ELEMNT, Wahoo Bolt, Wahoo MINI - Compatible – 1-1/8" Steerer tube Diameter, - Thickness: 5mm, Length 50mm (Center-to-Center) - Recommended for 0 Degree to Negative Degree Stem Angles - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Weight: 25g - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded

An excellent choice for mountain, cross, and road cyclists who prefer to have the computer above the stem. - Far and away more advanced than the plastic options on the market - Boost Stem Mount is specifically designed to fit atop the shortest stems on the market today - The Gravity Cap replaces your existing top cap and is ideal for Downhill, Enduro, Gravel, Touring, etc - The mount replaces a standard 5mm spacer and is locked securely in place by the top cap compression system - Compatibility: Wahoo ELEMNT, Wahoo Roam, Wahoo Bolt, Wahoo MINI - CNC-machined aluminum for low weight and strength - Made in the USA with a lifetime warranty - Stem mount that is for short, steep stem angles boosting the computer up above by 1cm