Filter By:
- Saddles (33)
- Bar Ends (1)
- BMX (1)
- Bottom Brackets (22)
- Brakes/Levers/Pads (100)
- Cables (27)
- Cassettes/Freewheels (31)
- Chainrings (25)
- Show More Categories
- Chains (51)
- Cranksets (16)
- Derailleurs (32)
- Forks (3)
- Groups (1)
- Handlebar Grips/Tape (41)
- Handlebars (13)
- Headsets (3)
- Pedals (45)
- Seatposts (10)
- Shift/Brake Combinations (5)
- Shifters (20)
- Stems (10)
- Other (101)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts
$700.00
Gravel throws just about everything at your bike, and the RED XPLR AXS rear derailleur will happily take it all. Bring on the sticks, stones, and airport baggage abuse because the Full Mount derailleur design fits onto frames with the hangerless interface to make for the most robust and reliable gravel drivetrain possible. No adjustment screws mean the setup is simpler than ever. And a surprise stick is no match for the Magic Wheel, as the debris-resistant lower pulley keeps the chain moving at all times. Purpose-built for gravel, this 1x-specific unit prioritizes shift precision and chain management no matter the terrain or conditions.
FEATURES
- 1x specific for use with 10-46T XPLR 13-speed cassette and road Flattop chains
- The Hangerless Interface and Full Mount attachment allow for the most precise shifting and the ultimate resistance to impact
- Requires frame with UDH interface
- Simple setup with no adjustment screws
- Superior chain management with MTB-inspired spring clutch
- Replaceable and rebuildable parts
- Magic Wheel keeps the chain moving, even if debris enters the lower pulley
- Compatible with existing AXS batteries
$600.00
As the terrain gets tougher and the pace gets faster, you need the right range to keep moving and the best steps between gears to keep up. The 460% range of the RED XPLR XG-1391 13-speed cassette gives you the climbing gears you crave on gravel and the tight jumps you need on spicy sprints. Enjoy the highest shift quality on even the roughest roads thanks to optimized shift features on each cog, all from a cassette that weighs only 288 g.
FEATURES
- Expanded 460% range gives the added coverage 1x gravel riders' demand
- For use with XPLR 1x 13-speed rear derailleurs
- Only 288 g
- Compatible with all road Flattop chains
- Compatible with XDR driver body
$575.00
Enjoy the ultimate advantage of freedom and adventure that Eagle provides combined with the Quarq power meter platform that delivers on accuracy and reliability. The SRAM Eagle XX1 power meter is built to pair with the SRAM Eagle drivetrains, providing a significantly quieter performance and extraordinary durability. Take it on the dirtiest, gnarliest trails while maintaining confidence in your cycling components. You came to perform; the Eagle XX1 power meter will perform with you. You are working hard, pushing yourself to new heights in some of the toughest conditions. Ride with confidence knowing that your power meter will not quit when you need it the most. Enjoy up to 200 hours of ride time in any weather or trail condition with its IPX7 waterproof rating and 10k temperature compensation; if harsh environments do not hold you back, then you need a product capable of rising to the occasion. The Eagle XX1 power meter is designed to be rough-and-tumble tough. Train harder, ride faster and unlock your ultimate potential. The Eagle XX1 power meter brings simplicity and ease-of-use to your training. With MagicZero automatic calibration, there is no need to worry about calibrating before you ride; just jump on your bike and go. The Eagle XX1 also features Bluetooth low energy and ANT+ wireless data transfer, delivering power output information directly to your cycling computer.
- Speeds: 11/12
- BB Compatibility: DUB:BSA73, PF89.5, PF92, PF30 MTB73, BB30 MTB73, BSA MTB68SP
- Bolt Circle Diameter (BCD): 104 BCD
- Chainline: 52.0mm
- BB Spindle Interface: DUB
- Power Meter Type: ANT+ and BLE
- Crank Arms/Chainrings not included
$545.00
SRAM GX Eagle drivetrains are engineered for optimal performance. Eagle drivetrains are designed, tested, and proven to deliver durable performance for all riders. Eagle technology provides an expanded, optimum gear range and is 100-percent compatible with all levels of SRAM Eagle drivetrain systems.
- The GX crankset is engineered for complete chain control with each tooth precisely designed to work seamlessly with the chain’s inner and outer links
- The GX Eagle rear derailleur gets the job done with an updated cage architecture that improves chain management and is compatible with both 10-52T and 10-50T cassettes
- The XG-1275 10-52T cassette offers expanded 520% gear range and features SRAM's Full Pin technology, making it both lightweight and durable
- The trigger shifter puts total control of your gear selection into the thumb of one hand
- GX Eagle chain for smooth and efficient shifting
- DUB bottom bracket sold separately
$474.99
The S-works Power Saddle with Mirror technology is the perfect reflection of you.
- Patented Body Geometry design is lab-tested to ensure blood flow to sensitive arteries.
- Mirror technology utilizes 3D printing from liquid polymer to create a one-of-kind
honeycomb structure that offers superior sit-bone support and comfort.
- FACT carbon fiber shell is flex-tuned for support and ride compliance.
- Ultra-light, strong, and oversized FACT carbon rails
- SWAT-compatible mounts molded into the saddle base allow for sleek and integrated
storage solutions.
- Size 143mm / Weight 190g
- Size 155mm / Weight: 194g
- NOTE: Oversized 7x9mm carbon rails are not compatible with seatposts equipped with
side-load clamp mechanisms for 7mm round rails.
$354.99
- XTR M9120 brake lever and M9120 4-piston hydraulic disc brake caliper
- Increased stopping power & improved modulation for greater dowhnill confidence and control
- Additional contact point on handlebar increases stiffness by 8% vs BL-M9020
- Quicker engagement & shorter, adjustable free stroke
- ServoWave technology
- Toolless adjustable reach
- Pre-assembled with SM-BH90-SBM high power hose
- Includes N04C metal pads w/ fins
- Weight: 385g per side (lever, caliper, hose & RT-MT900 rotor)
$350.00
Mirror goes Pro. Our best-reviewed saddle technology, based on two decades of Body Geometry research and development, is now available on the Power Pro saddle. Looking beyond foam, we developed Mirror technology. By 3D printing with a liquid polymer to create an infinitely tunable honeycomb structure, Mirror saddles perfectly reflect your anatomy to keep you comfortable, powerful, and healthy in your unique position.
- Patented Body Geometry design is lab-tested to ensure blood flow to sensitive arteries.
- Mirror technology utilizes 3D printing from liquid polymer to create a one-of-a-kind honeycomb structure that offers superior sit-bone support and comfort.
- Reclaimed carbon fiber and nylon-injected base. 15% reclaimed carbon fiber.
- Titanium rails.
- SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions.
$324.99
Mass is the enemy of performance, so we pulled out all the stops to make the Alpinist Seatpost the lightest post we've ever seen that passes our standards. At 136 grams (27.2mm x 300mm), it's about as light as you'll find. Not only does light weight make for faster climbing, it also improves acceleration and ride quality. The Alpinist 2-bolt micro-adjust clamp with extended saddle cradle ensures precision fit and secure retention. Available in two sizes, 27.2mm x 300mm and 27.2mm x 360mm, each with a 12mm setback. And because they are backed by a no-fault crash replacement policy and lifetime warranty, you can rest easy knowing that we've got your back.
- 136 grams (27.2mm x 300mm),
- 2-bolt micro-adjust clamp with 46mm saddle rail cradle enables an effective offset from 0mm to 20mm.
- Advanced composite construction delivers light weight and reliability.
- Available in two sizes: 27.2mm x 300mm x 12mm offset, 27.2mm x 380mm x 12mm offset
- No-Fault crash replacement policy. Lifetime warranty
- System Weight Limit: 275lbs / 125kg
$314.99
The lightest, longest, smoothest, and most reliable dropper post that will fit your bike.
The V3 is the lightest infinitely-adjustable dropper post on the market, it has the shortest total length and stack height of any dropper post, 20mm of adjustable travel, an extended 350-hour service interval, and new ultra-low friction IGUS® bushings and SKF® seals. Plus, save an additional 10g with our Titanium Bolt Upgrade Kit.
$305.00
$319.99
5% Off
An entry level fork with the latest features and performance; Judy Silver is built around a brand new chassis derived from the Pike, works with Plus tires up to 2.8 in both the 27.5" and 29" models. Judy Silver features the Motion Control RL damper and is compatible with OneLoc remotes and has Fast Black upper tubes for an all-black look and low friction performance.
- 80-120mm travel
- External rebound
- TurnKey lockout controls
- Fast Black upper tubes
- Motion Control RL damper
- Compatible with OneLoc remote
- Solo Air spring
$300.00
The Specialized S-Works Power Arc saddle expands on the success of the original S-Works Power saddle, while featuring the same channel and length as the original. This means that it features a stiff, FACT carbon fiber shell and rails and lightweight EVA padding. The shape of the saddle is also designed to provide ample sit bone support, and this has been coupled with a shorter-than-usual nose section to keep pressure off of soft tissue while riding in aggressive positions. They even took this ideology a step further via an extra wide and elongated Body Geometry channel that's been proven through blood flow testing and pressure mapping to reduce numbness and pressure on unwanted areas.
And while this all seems familiar if you're already a Power loyalist, this iteration features a curved Body Geometry shape that better contours to your body. What does this mean for your ride? It means that you'll feel as if you're “in the saddle," not on it. And ultimately, this equates to greater comfort and superior performance in all seated positions, whether you're a man or woman.
- Patented Body Geometry design is lab tested for both men and women to assure blood flow to sensitive arteries.
- Stiff FACT carbon fiber shell is tuned for support and ride compliance.
- Super-light EVA padding for comfort and support on longer rides.
- Ultra-light, strong, and oversized FACT carbon rails.
- Level 2 padding: Medium density foam for bike feel with additional cushioning.
- SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions.
- Size 143mm / Weight: 141g
- Size 155mm / Weight: 145g
$275.00 - $299.99
In terms of both comfort and performance, anywhere that your body touches the bike is of the utmost importance. That's why Specialized designed the S-Works Hover Carbon Handlebars to excel on both fronts. Starting with the construction, they're made from their FACT carbon fiber for a light overall weight, vibration absorption, and high rigidity. And for comfort, much of it boils down to fit. Along these lines, they feature a shallow drop and bend that's extremely comfortable, while they also offer a 15mm rise to help accommodate a wide fit range.
- FACT carbon construction offers an optimized blend of durability and light overall weight.
- 15mm rise for additional rider fit range.
- Shallow Bend Drop: 123mm Drop x 75mm Reach
$275.00
An entry level fork with the latest features and performance; Judy Silver is built around a brand new chassis derived from the Pike, works with Plus tires up to 2.8 in both the 27.5" and 29" models. Judy Silver features the Motion Control RL damper and is compatible with OneLoc remotes and has Fast Black upper tubes for an all-black look and low friction performance.
- 80-120mm travel
- External rebound
- TurnKey lockout controls
- Fast Black upper tubes
- Motion Control RL damper
- Compatible with OneLoc remote
$250.00 - $275.00
- Rider Tuned Gearing
- Wider Gear Combination: 11 – 28T/12 – 28T/11 – 30T (New Gear Combination)
- Closer Gear Combination: 11 – 25T/12 – 25T
- Lightweight
- CFRP & Alloy Spider Arm, 5 Titanium Sprockets
- Gear Combination: 11 – 25T, 11 – 28T, 11 – 30T (New Gear Combination), 12 – 25T, 12 – 28T
$269.99
The Terra seatpost is the best choice for riding mixed terrain, gravel, or rough roads because it smooths the ride by allowing significant vertical compliance. The secret to this ride smoothing post is in the composite layup that we utilized. By utilizing composites with varying elongation characteristics at specific locations in the post, we enabled vertical compliance for comfort while retaining requisite strength for mixed terrain riding, all at a sub-200 gram weight (27.2 x 330 x 0).
- 18mm Vertical Compliance (20mm offset / Full Extension)
- 194 grams (27.2 x 330mm x 0)
- Advanced composite construction delivers ride-smoothing vertical compliance.
- Available in four sizes: 27.2mm x 330mm x 0 offset, 27.2mm x 380mm x 0 offset, 27.2mm x 330mm x 20mm offset, 27.2mm x 380mm x 20mm offset
- No-Fault crash replacement policy. Lifetime warranty
- Proven clamp design ensures ease of adjustment and slip-free performance.
- System Weight Limit: 275lbs / 125kg
$250.00
Light, stiff and smooth. It all comes together in one outstanding package with SRAM's OG-1090 10-Speed Cassette. Unlike traditional cassettes made by combining individual cogs, the entire OG-1090 is precision machined from a single steel block, heat treated and capped with a premium nickel finish, resulting in a revolutionary cassette that's incredibly stiff, light and durable. Plus, SRAM's OpenGlide Technology removes additional material from the cogs for ultra-smooth shifts every time, even under load.
$249.99
Three-Speed Sturmey Archer Coaster Brake Trike Conversion Kit
- 21T Front Drive Cog
- 22T Rear Transfer Cog
- 24T Axle Drive Cog
- Cable stop required when installing on Sun Atlas Industrial Cargo Trike
$231.00 - $235.00
Ride anywhere with this wide range XG-1275 cassette—it always provides the right gear. Fast on the flats. Control on the climbs. Dictate your own pace, anywhere. FULL PIN technology uses lightweight, stamped steel cogs held together with high-strength stainless steel pins. The result: a cassette that’s light and strong. The open design similar to SRAM's X-DOME cassette aids in mud clearance, giving you cleaner shifting performance and longer component life. X-GLIDE2 improves both inboard and outboard shifting, as well as chain retention.
- Cassette Body Type: SRAM XD
Cogs:
- 10 – 50T: 10, 12, 14, 16, 18, 21, 24, 28, 32, 36, 42, 50
- 10 – 52T: 10, 12, 14, 16, 18, 21, 24, 28, 32, 36, 42, 52
$210.00
The Perfect Reflection of You. The Power Expert with Mirror saddle combines comfort and performance for riders whether they are podium-seeking crushers or everyday cruisers. The Body Geometry designed Power shape with high-tech Mirror inserts provide sit bone-friendly support road to mountain uses.
ATTAINABLE TECH: The Power Expert with Mirror saddle provides riders with a significant reduction in pain-causing pressure when compared to it's foam counterpart, the Power Comp Saddle. Inside the saddle are two tear drop shaped Mirror Technology inserts that target sit bone pressure. Riders around the world will be stoked that the new Expert level Power Saddle with Mirror technology make these benefits more attainable than ever.
POWER SHAPE: Our beloved Power shape, with a cutout. The patented Body Geometry design is lab-tested to ensure blood flow to sensitive arteries. Is it a road saddle? Mountain saddle? In short, yes. We hate to say a product works "for everything", but it does. We believe that performance-in saddle speak-means comfort. And whatever shape and material suits you, will be your highest performing saddle.
MIRROR TECHNOLOGY: We developed Mirror technology by 3D printing from a liquid polymer to be a perfect reflection of you. Mirror technology allows for infinite density tuning with a single material, but any material is only as good as the designers and engineers that use it. Thanks to our Body Geometry methodology, Retul data, and decades of experience, the 3D-printed matrix is tuned to support the sit bones across a greater area, creating a hammock effect that lets the saddle support your weight, not the tissue around your sit bones.
ANY BODY, EVERY RIDE: We know that every body is different, but the issues facing riders in the saddle are the same—sit bone pressure, scar tissue build-up, and blood flow loss. Using pressure mapping, blind comfort studies, and blood flow studies, Body Geometry and Mirror Saddles don't just promise to solve these issues for people-we've proven they do. Plus, this is the first saddle with Mirror technology in additional sizes (130 and 168).
ALL AROUND USE: The Power Expert With Mirror saddle uses the same 3D printed technology as the S-Works Power with Mirror except the Expert has 4-way stretch cover to keep mud and debris out of the nooks and crannies of the Mirror lattice. That dirt-shedding feature, plus super durable, yet light weight hollow titanium rails make the Power Expert with Mirror the smart choice for gravel and mountain riders, in addition to those who stick to paved surfaces.
Web Bullets
- Patented Body Geometry design is lab-tested to ensure improved comfort and blood flow to sensitive arteries.
- Mirror technology inserts to provide additinal sit bone relief.
- SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions.
- Lightweight and durable hollow Ti rails.
- Supportive and lightweight PU foam surrounding the 3D printed inserts.
- Size 130mm / Weight: 210g
- Size 143mm / Weight: 214g
- Size 155mm / Weight: 225g
- Size 168mm / Weight: 227g
$204.00
- Larger platform aluminum body with 2-sided clipless mechanism for DH/AM use
- Low profile machined aluminum platform
- Triple sealed bearings with DU bushing
- Adjustable cleat engage/release tension on each side
- X1 4d & 8d cleats replaceable pins
$200.00
- 2-sided clipless pedal for gravity riders
- Large platform extruded and CNC machined aluminum body
- Updated cage with front plates and bevelled edges
- 685zz sealed bearings and IGUS bushing
- Adjustable cleat engage/release tension on each side
$189.99
For XC racing, stiffness equals speed. That’s what drove our thinking when building the Roval Control SL handlebar. Borrowing inspiration from trail bike tech, we knew a 35mm bar clamp width would give us the rigidity our athletes demanded, and function as the backbone for our ultra-light, hand laid up carbon.
It’s light… Like, 185 grams light.
But, light-weight and stiffness aren’t the only pieces of the puzzle. Riders also need high-precision control while descending, and a comfortable, sustainable position on grueling climbs. The Roval Control SL’s 780mm width allows you to dial in your perfect size, and it’s World Championship proven geometry gives the confidence to attack any segment.
- Material: High modulus carbon fiber
- Width: 780mm, includes cut marks to customize width
- Rise: 0mm or 20mm
- Upsweep: 6 degrees
- Backsweep: 8 degrees
- Clamp Diameter: 35mm
- Weight: 185g
$180.00
Light, high-tech and comfortable, Specialized's S-Works Carbon Seatpost will improve your ride. It's built of Specialized's FACT carbon for a feathery weight and impressive strength and durability. Plus, the post features a cylindrical head assembly that's simple to adjust fore/aft and tilt with a single bolt. The S-Works seatpost comes in a 400mm length with zero or 20mm setback, as well as a 350mm length with 20mm setback.
$174.00
KEO BLADE CARBON pedals feature a Chromoly axle and stainless steel bearings for extreme reliability. Beyond its weight, the larger surface contact area-to-weight ratio is the best in class. Light, aerodynamic and powerful, these pedals are ready for the ride.
- New leading edge profiling for increased aero dynamics and reduced drag
- Improved sealed spindle design to resist water intrusion with dual sealed steel bearings and 1 needle bearing
- Better retention lever durability compared to previous design
- Easier clip-in rotation due to improved weight balance
- 3-part high grade stainless steel contact points for higher impact resistance and durability
- 64mm wide platform and 700mm² contact surface provides maximum power transfer and distribution of foot pressure
- Easy clip in/out with composite blade retention 8 (installed)
- Carbon Body, Chromoly + Spindle
- KEO cleats included
$169.99
The Deore XT M8100 hydraulic disc brake is designed to provide high performance braking for a variety of MTB riding styles. Includes the brake lever and disc brake caliper.
- BL-M8100 features a stiffer brake lever design that provides added support for aggressive riding
- Servo Wave Action technology means quicker brake engagement with shorter free stroke
- The BR-M8100 2-piston brake caliper is optimized for cross country riding styles
- Includes finned metal pads and hose
- Brake Caliper Type: Post Mount
- Hydraulic Hose Length: 1000mm (Front) / 1700mm (Rear)
- Hydraulic Fluid Type: Mineral Oil
- Rotor Included: No
- Pad Compound: Metallic
$169.99
Designed with our Retül fit specialists, doctors, and engineers, the Sitero Plus is the best-fitting saddle for aerodynamic time trial positions. A wide channel, progressive shape, level 3 padding, and multiple width options provide optimal comfort and support for long distance rides in an aerodynamic position. And, to further ensure that this is the best Triathlon/Time Trial saddle on the market, it features hollow Chromoly rails and SWAT mounts that allow for aerodynamic storage of your ride essentials.
- 4-way stretch cover material for unparalleled Pelvic rami comfort.
- Durable, hollow Cr-Mo rails.
- Integrated Direct Mount Reserve Rack included for bottle/equipment storage solutions.
- Level 3 padding: Low/Medium density foam provides the perfect blend of bike feel and cushioning.
- Lightweight and supportive PU padding for comfort and support on longer rides.
- Next-level comfort for riders of all sizes while in the aero position.
- SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions.
$164.99
The Shimano Deore XT CS-M8100 12-speed cassette is optimized with rider-tuned wide-range and close step gear combinations for MTB excellence.
- Shift ramp designs provide fast and smooth shifts by HYPERGLIDE+ technology
- Light and stiff construction reduces cassette inertia resulting in faster acceleration and increased chain security
- Designed with a Shimano Micro Spline body that features smaller and more widely distributed splines to limit cog damage on freehub
- Cassette Body Type: Shimano Micro Spline
- Cassette Cogs: 10-12-14-16-18-21-24-28-33-39-45-51
- Drivetrain Speeds: 12
- Range: 10-51
$160.00
For as long as there've been saddles, women have been having issues with them. But where some see unsolvable problems, we see practical solutions. We spent countless hours performing research and prototyping in order to give you the comfort that you've been rightfully longing for. With our patented design, Mimic technology helps create a saddle that perfectly adapts to your body to give you the support you need.
And when you combine this technology with our Power Expert saddle, with its hollow titanium rails and level II padding for extra comfort, you get a high-performance saddle that's designed to help you perform at your best. It still features all of the Body Geometry design characteristics you know and love, so you can be assured of superior, all-day comfort in any ride position.
- Patented Body Geometry design is lab-tested to ensure blood flow to sensitive arteries.
- Innovative Mimic technology uses multilayered materials to maintain equilibrium and minimize swelling in soft tissue.
- Lightweight, durable, and hollow titanium rails.
- Level II padding: Medium density foam for bike feel with additional cushioning.
- SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions.
- Weight: 200g
$160.00
For as long as there've been saddles, women have been having issues with them. But where some see unsolvable problems, we see practical solutions. With our patented design, MIMIC technology helps create a saddle that perfectly adapts to your body to give you the support you need.
And when you combine this technology with the long-nosed, curved profile of the Romin Evo Expert saddle, with its hollow titanium rails and Level II padding for extra comfort, you get a high-performance saddle that's designed to help you perform at your best. It still features all of the Body Geometry design characteristics you know and love, so you can be assured of superior, all-day comfort in any ride position.
- Patented Body Geometry design is lab-tested to ensure blood flow to sensitive arteries.
- Innovative Mimic technology uses multilayered materials to maintain equilibrium and minimize swelling in soft tissue.
- Lightweight, durable, and hollow titanium rails.
- Level II padding: Medium density foam for bike feel with additional cushioning.
- SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions.
$150.00
Specifically engineered to optimize Eagle Transmission, the XX SL Eagle Transmission Flattop Chain features a unique flat top. Not only does this shape maximize shifting performance and robustness, but it also contemporizes the look of your super bike, especially with its outer plate cut outs and hollow pins that push the strength-to-weight ratio to an unprecedented level.
- Not suitable for E-MTB
- Flattop design specifically engineered for Eagle Transmission
- Ultimate shifting performance, game-changing aesthetics
- Super-light outer plates with cut-out design
- Includes PowerLock connector
Page 1 of 20
Next page