Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Other

Sun Bicycles Coaster Conversion Kit, 3-Speed
$249.99
Three-Speed Sturmey Archer Coaster Brake Trike Conversion Kit - 21T Front Drive Cog - 22T Rear Transfer Cog - 24T Axle Drive Cog - Cable stop required when installing on Sun Atlas Industrial Cargo Trike
Profile Design Sonic Ergo 35a
$170.00
Our new Sonic bracket has been designed as the successor to the J2, which has been a somewhat ignored part of our range. With this update it brings our new generation fit range to a wider range of price points, replacing the J2 bracket. The Ergo armrest has been created to offer both a huge upgrade in fit range as well as increased rider comfort with a supportive curve to cup the arms. Performance - The Sonic/Ergo is designed to present minimal frontal area to create as little aerodynamic drag as possible. The main purpose of an aerobar is, of course, to get the rider into a fast position. Despite a fairly minimalist appearance, the Sonic/Ergo offers a comprehensive fit range for exactly this purpose. Fit Data - Armrest Offset: -70mm to -2.5mm in 7.5mm steps - Armrest Width: 124mm to 290mm in 18.5mm steps (With Extensions at 100mm) - Armrest Stack: 60mm (no riser kit) to 130mm in 5mm increments (With aftermarket Riser Kit) - The extension length and rotation can be easily adjusted using the top bolt. There are 100 distinct position options achievable just by moving the armrests. Combine that with the risers and this bar offers 1500 possible configurations. As a clip-on bar it is also possible to adjust the extension width and tilt easily. This is the most adjustable clip-on bar on the market (and in history). It is worth noting that our previous top level clip-on aerobar, the J4/F35, offered 90 possible configurations. This highlights the significant step forward we’ve made with our new generation aerobars in allowing riders to precisely adjust their position. Origin - After we released the Supersonic (J5) as a premium bracket with market-leading fit options and versatility, we wanted to bring the same kind of options to the rest of our range of brackets and thus aerobars. By simplifying the extension clamp and shifting the wing forward to the bar center line, we were able to meet our targets. As a consequence of the simplification the Sonic is the lightest of our current brackets. The Ergo armrest shares the flippable design of the rest of our new generation armrests. By swapping sides or rotating the armrests, smaller increments of movement are achieved – making it simple to fine-tune a rider's position or match the position from their previous aerobar or bike. Extensions - Extension Shape: A 35 degree ski-bend extension suited to riders who prefer to adopt a wrist angle that is on the low side of the neutral range. - The 35a is a straight 35° bend. - Bracket: Sonic - Clamp Diameter: 31.8mm (26.0 w/Shims) - Armrest: Ergo / 10mm Pads - Armrest Width: 124mm to 290mm in 18.5mm steps (with Extensions at 100mm) - Armrest Offset: -70mm to -2.5mm in 7.5mm steps - Armrest Stack: The minimum is 60mm and the bracket is compatible with our existing risers which add up to 130mm stack with (70mm of spacers added) - Weight: 559g
Profile Design Sonic Ergo 45AR Aero Bar Extension
$150.00
The Sonic/Ergo/45AR aerobar offers comprehensive yet simple adjustments, ideally suited to riders wishing to add aerobars to their road, gravel, or bikepacking bike. The Sonic/Ergo platform offers a large range of adjustments in every dimension, enabling riders to optimize the comfort of their positions. This bar can be used for draft-legal triathlon once shortened to meet the ITU Rules. - Clamp Diameter: 31.8mm (26.0 w/Shims) - Armrest: Ergo Ultra / 10mm Pads - Armrest Width: 124mm to 290mm in 18.5mm steps (with Extensions at 100mm) - Armrest Offset: -70mm to -17.5mm in 7.5mm steps - Armrest Stack: The minimum is 60mm and the bracket is compatible with our existing risers which add up to 130mm stack with (70mm of spacers added) - Extension Width: 100mm - Weight: 545g
Shimano Di2 Battery Charger
$103.99 - $135.99
Shimano's Di2 electric drivetrain takes shifting to the next level. Two Di2 Battery Chargers are available. Choose the model designed for your system's battery. An additional power cable is required for the external-style battery charger (sold separately). These chargers fully charge the battery in 90 minutes.
RockShox OneLoc Remote
$88.00
The new OneLoc remote provides total control over your RockShox fork at your fingertips. The increased leverage at the bar translates in a smoother and easier actuation. Its countless mounting options (left and right, below or above the bar, tall or standard clamp) make it an ideal companion for SRAM's drivetrain, brakes and RockShox's Reverb remote.
SRAM XX1/X01/GX Eagle Rear Derailleur Ceramic Bearing Pulleys
$73.00
Original equipment ceramic bearing pulleys for SRAM rear derailleurs. - Chain Compatibility: SRAM XX1
Specialized Command Post SRL
$60.00
The SRL lever gives riders with 1x drivetrains the option to control their Command Post with lever option that mounts beneath the bar in place of a front shifter. - Command Post lever for the modern 1x drivetrain systems. - Adjustable lever position allows for the perfect set up. - Sealed cartridge bearing pivot for smooth action. - Ideal pull ratio for easy lever activation. - Requires additional mounting hardware (SRAM MatchMaker or equivalent is recommended).
Problem Solvers Cable Doubler
$59.99
The Problem Solvers Cable Doublers are made of light, durable machined and anodized aluminum and they are Teflon coated for a super-smooth cable pull every time. They come in two models. The first allows you to control two brakes with one lever. The second allows you to control one brake with two levers. Why? Well, there are myriad applications: tandems, cyclocross bikes, fixies, tricycles, recumbents, cycles for those with special needs, bike polo bicycles, those 4-person bikes you see on beach boulevards, and so on. You could even link both models of Cable Doublers together for the ultimate in redundancy!
Wheels Manufacturing Inc. Derailleur Hanger 323
$50.00
All Wheels Mfg. replacement derailleur hangers are produced in Colorado to exacting tolerances. - Replaces Specialized Part #S172600001 - Includes both sides of the derailleur hanger - Attaches to frame with (1) M3x6 socket head screw (sold separately) - CNC machined 6061 aluminum - Black anodized finish
Problem Solvers I-Spec II Shifter Clamp
$49.99
These simple clamps allow riders to mount I-Spec II compatible shifters or dropper levers onto their bars without the otherwise-requisite Shimano I-Spec II compatible brake levers. Sold individually and can be used for either right- or left-hand side. - Hinged clamps for easy installation without removing other components - AL-6061, anodized black - 23 grams - For use only with I-Spec II compatible shifters or dropper lever
Problem Solvers Problem Solvers I-Spec EV Shifter / Dropper Remote Bar Clamp
$49.99
I-SpecBar Clamps are a one-piece hinged clamp adapter that allows users to mount I-Spec compatible shifters or dropper levers onto the handlebar, without requiring an I-Spec brake lever. - Sold individually, the clamp can be mounted to the right or left side - Hinged clamp for easy installation without removing other components - Black Anodized, CNC AL-6061 Aluminum - Compatible only with Shimano I-Spec II compatible shifters or dropper post remotes - 23g
Wheels Manufacturing Inc. Derailleur Hanger 22
$48.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M4x10 Flat Head Screw Note: This hanger has a pin machined in to it that inserts in to the frame (refer to photos).
Wheels Manufacturing Inc. BB30 ABEC-3 Bearings & Clip Kit
$47.25
BB30 service kit includes 2 Enduro 6806 ABEC-3 sealed bearings and 2 retaining clips. - Bearing Dimensions: OD: 42mm / ID: 30mm / Width: 7mm - Direct replacement bearing for OEM BB30 and BB30A systems - Enduro ABEC-3 bearings
Delta Stem Raiser
$46.99
- Clamps to a threadless steerer - Offers up to 4-1/2" stem height increase - Forged 6061-aluminum provides extra strength - Machined aluminum top cap is threaded, providing easy installation
RockShox Maxle Stealth Front Thru-Axle
$42.00 - $45.00
The Maxle Stealth offers a light, low-profile, tooled alternative to Maxle Lite. - 34g lighter than Maxle Lite - Easy installation with a 6mm Allen wrench
SRAM X-Sync Pulley Assembly
$45.00
Original equipment rear derailleur pulleys for SRAM rear derailleurs. Fits X01, X01DH, X1, GX 1x11, NX, Force CX1, Force 1, Rival 1, Apex 1 Derailleurs. - Wide-narrow pulley tooth profile holds the chain better - Stainless steel sealed cartridge bearings
Wheels Manufacturing Inc. Derailleur Hanger 13
$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Socket Head Cap Screws
Wheels Manufacturing Inc. Derailleur Hanger 5
$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M6 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 9
$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Cane Creek AER Headset Bearing
$39.99
Bearings for Cane Creek AER headsets. - Aluminum Bearing
SRAM Bottom Bracket Adaptor
$39.00
SRAM PressFit 30/English Bottom Bracket Adaptor allows conventional threaded bottom brackets to be installed in a PF30 frame. - Not to be used with internal threaded bottom brackets; compatible with BBs that use two external cups
Sunlite Derailleur Hanger
$14.99 - $38.99
- 6061 Forged Alloy - Made to O.E.M. specifications - Correct hardness to reduce damage to frame upon impact
RockShox SKF Wiper Seal Kit 32mm
$36.00
- Upgrade your suspension fork with ultra-low friction wiper seals providing unmatched suspension feel, all while keeping the dirt where it belongs- because no one wants dirt in there
K-Edge Road Braze-on Chain Catcher
$35.99
The K-EDGE Road Chain Catcher is THE Original Chain Catcher used by professional cyclists and pro teams around the world, in all types of racing including prestigious Olympic Games, World Championships, and Grand Tours, such as the Tour de France, Paris-Roubaix, and Giro d ’Italia. The K-EDGE chain catcher is a simple add-on component machined to precision which improves the overall function of your drive train and protects your valuable frame from dropped chains. - Material: 6061-T6 CNC machined Aluminum - Fitment: All braze-on mounted front derailleurs* - Hardware: Includes all mounting hardware for Shimano, SRAM, and Campagnolo front derailleurs * Not compatible with Campy EPS * May not work with all third party braze-on adapter clamps - Made in Boise, Idaho, USA, - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.
Shimano Dura-Ace R9100 Rear Derailleur Pulley Set
$35.00
Get that nice derailleur shifting smoothly and operating silently again with a Shimano Rear Derailleur Pulley Set. - OEM pulley set for Dura-Ace R9100 - Sealed bearing guide & tension pulley - Guide pulley with extra long teeth for increased chain control
Specialized Pave Clamp 7+9mm
$35.00
Re-engineered clamp with an optimized center-loaded bolt design equalizes load distribution to ease position adjustments. With this clamp set you will be able to clamp metal 7x7mm saddle rails and Specialized FACT carbon 7x9mm saddle rails. - 7x7mm and 7x9mm replacement clamp set for all Specialized road seatposts equipped with a single-bolt cylindrical wedge clamp design - New design clamp for better clamping and non-slipping of the saddle
Wheels Manufacturing Inc. Derailleur Hanger 301
$35.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - (1) M5x10 socket head screw included - Replaces Specialized Amazinger 2.0 (S16260002) and Amazinger 2.1 (S172600003) Hanger
Wolf Tooth Components ShiftMount SRAM Matchmaker Shifter to I-Spec-II Brake
$35.00
Wolf Tooth ShiftMounts are adapter mounts that allow you to integrate SRAM and Shimano shifters with several different brakes from Shimano, SRAM, and more. Handlebar space is prime real estate and the ShiftMount seamlessly integrates brakes and shifters for a clean look. - Designed to work with rear (right side) brakes and shifters - Consult the brake and shifter manufacturers to understand which mounting interface you have on your brakes and shifters - For handlebar clamp ShiftMounts tighten clamp bolt to 1-2 Nm max torque - 6061-T6 aluminum - MM-ISII is for a SRAM MatchMaker shifter mounting to a Shimano I-SPEC II brake - MM-ISII is compatible with M9020, M9000, M8000, M7000, and M6000 brake levers - MM-ISII is compatible with, but not designed for SRAM AXS because the shift lever will be further towards the end of the bar, or closer to the rider's hand than is ideal for most riders
Wolf Tooth Components Seatpost Clamp
$34.99
The precision-engineered Wolf Tooth Seatpost Clamp secures your seatpost and looks good doing it. At the heart of the Wolf Tooth Seatpost Clamp is a custom self-aligning bolt and anchor. The M5 bolt includes spherical washer and mates with a cylindrical anchor barrel. This means that threads are always perfectly aligned, preventing binding and ensuring consistent clamping force. - M6 stainless steel bolt with integrated washer Tool interface - 4mm hex key
Salsa Rack-Lock Seat Collar
$34.00
Rack-Locks are one part form, two parts function. Sure, they still look great and do a great job of keeping your seatpost in place, but they also provide a mounting position for the front struts of a rack. - Max torque 3–5Nm - AL-6061 Aluminum - Strong rack attachment points - 34mm-wide rack mount threaded for M5 bolts - Stainless steel pivot and bolt - Available in 30.0, 32.0, 35.0, and 35.4 mm sizes - Black anodized with laser-etched logo - 45g for a 32.0mm collar
Page 1 of 4 Next page